- Created on Tuesday, 03 April 2001 03:52
- Written by Wayne Punch
Almost everyone in the industrial laundry business says that – until they get burned. With electronic equipment often housed in older buildings, it doesn’t take much for a fire to break out, even for those who are prepared. This is a true story. Two hundred employees were doing their jobs in an 800,000 square-ft. building made of concrete and steel. Nobody expected this day to be different from any other, but no one expected a fire. Within 10 minutes all 200 employees were evacuated from the blazing structure. Luckily no one was injured. The building, however, didn’t fare as well. It burned to the ground.
Fortunately this company had a fire prevention/protection process in place. The key word here is process, not program. What’s the difference? A process involves continual training, testing and education. A program exists in some handbook sitting on a shelf, usually unopened and unread.
The primary goal of a fire prevention/protection process is to safeguard the lives of employees. A well-rounded process includes five areas:
Within 10 minutes all 200 employees were evacuated from the blazing structure. Luckily no one was injured. The building, however, didn’t fare as well. It burned to the ground.
The success of a fire prevention/protection process depends on the employees and their knowledge about all areas of the process. Let’s examine each one in detail.
Definition involves informing employees that a process is in place, providing them with detailed descriptions of each area and emphasizing the importance of the fire prevention/protection process.
The methods area focuses on how employees are trained to recognize different types of fires. An incipient fire involves equipment or machinery inside a building. A structural fire is in the walls, roof, or floor of a building.
There are two ways to respond to fires. First responders are employees who know how to use a fire extinguisher. The second type of response mechanism involves fire brigades, which are comprised of employees trained to fight structural fires. Members of a fire brigade are required to undergo instruction according to Occupational Safety and Health Administration (OSHA) guidelines and regulations. Often, they have experience as fire department volunteers.
How does an employee determine that a fire requires a first responder or a member of the brigade? Using the following rating system may help.
|TWO||SMALL FLAMES||FIRE EXTINGUISHER|
|THREE||FLAMES CONFINED TO EQUIPMENT/MACHINES
||FIRE EXTINGUISHER OR WATER HOSES|
|FOUR||FLAMES CONFINED TO EQUIPMENT/MACHINES||FIRE EXTINGUISHER OR WATER HOSES|
|FIVE||FLAMES IN STRUCTURE OF BUILDING||FIRE DEPARTMENT|
Whether a first responder or a member of a fire brigade, all employees must be aware of primary and secondary fire exit routes from their workstations, must be trained to go directly to outside pre-arranged gathering points and participate in at least one fire drill a year.
Holding annual fire drills is a good start, but it isn’t enough. The organization must measure the effectiveness of these drills by asking itself these questions:
- How long did it take to evacuate the building?
These critical questions require specific answers for the fire prevention/protection process to be effective.
Of course planning and training aren’t enough to extinguish a fire. Equipment must be monitored on a regular basis to ensure 100 percent functionality. This is metrics. It includes every piece of fire-fighting equipment from fire extinguishers, which must be fully charged and ready for operation, to water hoses, which must be subjected to pressure tests. OSHA requires/recommends that fire extinguishers, water hoses and ceiling sprinkler systems be inspected once a month to ensure they are in proper working order.
Identifying and eliminating hazards is critical to maintaining an effective fire prevention/protection process, particularly in an industrial laundry. Two strategies for reducing hazards and risks are good housekeeping policies and preventive maintenance.
Housekeeping involves removing or reducing possible fire sources, including lint and dust, as well as proper handling of chemicals. All chemicals must be labeled correctly and stored properly so that flammable liquids are secure. Paths to all emergency exit doors must always remain unobstructed, and emergency exit doors must remain unlocked from the inside.
Preventive maintenance involves the daily monitoring of internal equipment to help eliminate potential fires due to metal-on-metal static friction. Infrared analysis sensors measure metal surface temperatures and can be useful in detecting overheating motors and electrical panels before a fire breaks out. Potential dangers include dryers, both electric and gas (especially those using propane or natural gas), washer motors and pumps.
Perhaps the best ally in any fire protection process is knowing that the pros are on your side. Invite your local fire department over for lunch and an annual tour of the facility. Introduce your internal fire brigade, and review your entire fire prevention/protection process with them. Take time to show local firefighters where flammable liquids are stored, the location of water hoses and provide them with a material safety data list and a copy of your evacuation plan.
The key to an effective fire prevention/protection process is putting each step into practice. Hopefully you will never have to put your process to the test, but if you do, a well thought out, well-orchestrated fire prevention/protection process will help save lives and protect property.
Quick Rinse - News From Around The World
Crothall Employee Critically Injured
ROME, Ga. — A steam explosion which critically injured a maintenance worker is under investigation at Crothall Laundry Services. There were no other injures. Crothall Laundry Services provides linen and laundry services to medical facilities.